CSS Online Store

After-hours high-security door nuisance eliminator, anti-intrusion and anti-terrorist device.

To size the AD-100 outswinging door unit, we need the following dimensions:

· Frame Opening Width is the size of the door and defines bar lengths. The endblocks are designed to sit on the face of the jamb flush to the frame opening width.

· Face-to-Face dimension is the distance from the face of the door to the face of the jamb. Our standard product is designed for a 5¾" jamb and will work in a face-to-face range of 3½" to 4¾". Select the correct Jamb Kit for the larger jamb sizes. The face-to-face range is the distance that our attachment blocks or heat-treated hooks operate in.

To size the AD-200 inswinging door unit, we need the following dimension:

· Frame Opening Width which defines the size of the door and bar lengths.

The attachment blocks mount on the two-inch width of the jamb faces. Centerlines for the attachment blocks are the same as the hook centerlines on the support bar.

The endblocks are designed to push on the face of the door and the hooks pull on the jamb faces.

Most exterior doors are sold prehung with jambs installed in rough openings. The rough opening is generally two inches (2") wider than the door size and made using a double stud construction.

· AD-300 Single Inswinging. We designed the AD-300 unit with hooks and attachment block centerlines to center on the king stud (the first stud) outside the jamb. Each attachment block is anchored into a king stud using two 5/16" lag bolts to a depth of three inches (3"). This is where the resistance of 5,000 pounds per side comes from.

To size the AD-300 Unit, we need Frame Opening Width which generally defines the size of the door and the location of the rough opening. The rough opening gives us the centers of the king studs for installation.

· AD-350 Double Inswinging. We designed the AD-350 unit with endblocks five inches (5") or seven inches (7") center-to-center. When applying to double residential doors, pay attention to the stile and lock rail. The doors should have an astragal to prevent compromising the Ultra-Dog.

To size the AD-400 unit for double doors without mullion, consider the application first.

· Double Outswinging Doors should be equipped with an astragal or lip to cover the gap between the doors to prevent compromising this device. This product was designed for standard steel double doors without mullion but with an astragal and comes with three-and-one-quarter-inch (3¼"), five-inch (5"), or seven-inch (7") hook centers.

When applying the AD-400 to glass doors with metal frames, pay attention to the width of the stile or frame around the glass and the strength of the glass. The door should be equipped with an astragal. The application on glass doors with metal frames is a backup when the locking mechanisms have been compromised. An example would be convention centers or trade centers where locking mechanisms are frequently fouled.

· The Double Inswinging Door unit (AD-450 series) comes with five-inch (5") or seven-inch (7") block centers. When applying the AD-450 to residential double doors, pay attention to the stile and lock rail. The inswinging doors should also have an astragal.

To size the AD-500 unit for double doors with mullion, we need the following:

· Mullion Depth is the distance from the face of the door to the face of the mullion. Our products work within a range based on mullion depth.

· Mullion Width is the distance across the face of the mullion. This dimension becomes important when sizing a glass door with narrow metal frames.

· Free Space is the distance between the mullion and the edge of the stile (frame) that supports the glass. This dimension also becomes important when sizing glass doors with narrow metal stiles (frames).

AD-500's have either five-inch (5") or seven-inch (7") hook centers. This defines the attachment block position on the door. When sizing for glass doors, pay attention to mullion width and free space based on the centers above.

• High-security high-risk applications.
• Increases security - attachment blocks undetectable from exterior.
• Application to steel, aluminum, and glass doors.
• GluOn™ application tested at 5,000 pounds plus.
• Fire protection or resistance ratings not affected.

ADK-3100 for AD-100 series units
Kit: (2) 3"x3" hardened aluminum mounting blocks, attachment blocks, adhesive, tamperproof stainless steel hardware

• High-security high-risk applications.
• Increases security - attachment blocks undetectable from exterior.
• Application to steel, aluminum, and glass doors.
• GluOn™ application tested at 5,000 pounds plus.
• Fire protection or resistance ratings not affected.

ADK-3200 for AD-200, AD-300, AD-400, AD-500 series units
 Kit: (2) 3"x3" hardened aluminum mounting blocks, adhesive, tamperproof stainless steel hardware

• High-security high-risk applications.
• Increases security - attachment blocks undetectable from exterior.
• Application to steel, aluminum, and glass doors.
• GluOn™ application tested at 5,000 pounds plus.
• Fire protection or resistance ratings not affected.

ADK-3300 for AD-400 series units (narrow stiles)
Kit: (2) 1¾"x3" hardened aluminum mounting blocks, adhesive, tamperproof stainless steel hardware

Order 36" cable for use with:
AD-100, AD-200, AD-300, AD-500
 
Order 60" cable for use with:
AD-400