CSS Online Store

With flat snap. For cards with narrow slots which will not accept a raised snap.

Minimum order quantity: 50

Our redesigned magnetic badge holders are made of the same durable vinyl but are 50% lighter and have 60% more holding power thanks to a new neodymium magnet. The magnets are shielded at no extra cost, so they won't erase magnetic stripes on ID and credit cards. Meanwhile the benefits that made magnetic holders so popular haven't changed: no clips or pins, no damage to clothing, a more professional appearance and fewer lost cards.  Work with all types of cards.

Also, available in Thumbnotch Holders designed for easy card removal.

ID card slides into holder, and two magnets hold it on a shirt or coat pocket.

Magnetic ID Holders look sharp - enhance your company's professional image!

Vertical Format

Minimum order quantity: 50

Horizontal Format

Minimum order quantity: 50

These heavy duty, tear resistant clear vinyl,are made to last. The quality bulldog clip can be rotated for convenience.Vinyl is .030” thick on back and .012” thick on front.

Data Card Size

Also available in Credit/Business Card, Government and Convention Size

Minimum order quantity: 50

Minimum order quantity: 50

Now your personnel who are physically active can start wearing — and stop losing — their ID cards. The arm band design prevents the badge from being knocked off the wearer’s clothing. Great for baggage handlers, health care workers, warehouse personnel, etc.

• Arm band is adjustable to fit any arm size. Arm band length can be conveniently changed with only one hand and without removing it from your arm.
• Easy to put on. The arm band easily slides up your arm in its fully extended position then cinches down for a perfect fit.
• Elastic band flexes with your arm movements.
• You can choose from two arm band colors: white and navy blue.

For night time employees, there is a new version with fluorescent orange vinyl back and arm band. Avialable on request

Minimum order quantity: 25

With a plastic swivel hook at one end and a split key ring at the other.

• Great for casino slot cards
• 5-1/4” EVA coil can extend to four feet
• Coil diameter: 1/2”

Available: Black only

Minimum order quantity: 50

Keeps an ID or access control card at your fingertips. Ideal for people who use card readers frequently.
Available in 6 colors: Blue, White, Green, Red, Black, or Clear

Minimum order quantity: 50

Users of proximity cards have reported two major problems with their badge holders:
1) The cards are often thicker than normal ID cards, causing conventional badge holders to split apart after a short time.
2) Proximity cards don't work properly when they are very close to metal objects, such as metal badge clips.
S-Series Holders solve both problems. softer, more flexible material carries thicker cards without splitting. And the holders have no clip attached; they are slotted through the front and back. Using a strap clip keeps metal further away and locks the card into the holder.
Size: 3 3/8 X 2 3/8''

Minimum order quantity: 50

Users of proximity cards have reported two major problems with their badge holders:
1) The cards are often thicker than normal ID cards, causing conventional badge holders to split apart after a short time.
2) Proximity cards don't work properly when they are very close to metal objects, such as metal badge clips.
S-Series Holders solve both problems. softer, more flexible material carries thicker cards without splitting. And the holders have no clip attached; they are slotted through the front and back. Using a strap clip keeps metal further away and locks the card into the holder.
Size: 2 5/8 X 4 3/8''

Minimum order quantity: 50

Users of proximity cards have reported two major problems with their badge holders:
1) The cards are often thicker than normal ID cards, causing conventional badge holders to split apart after a short time.
2) Proximity cards don't work properly when they are very close to metal objects, such as metal badge clips.
S-Series Holders solve both problems. softer, more flexible material carries thicker cards without splitting. And the holders have no clip attached; they are slotted through the front and back. Using a strap clip keeps metal further away and locks the card into the holder.
Size: 3 3/8 X 2 3/8''

Minimum order quantity: 50

Users of proximity cards have reported two major problems with their badge holders:
1) The cards are often thicker than normal ID cards, causing conventional badge holders to split apart after a short time.
2) Proximity cards don't work properly when they are very close to metal objects, such as metal badge clips.
S-Series Holders solve both problems. softer, more flexible material carries thicker cards without splitting. And the holders have no clip attached; they are slotted through the front and back. Using a strap clip keeps metal further away and locks the card into the holder.
Size: 2 5/8 X 4 3/8''

Minimum order quantity: 50

Same heavy vinyl as our Clip-On ID Holders. And two-pocket versions are now available with an extra pocket on the back. Vinyl is .030” thick on back and .012” thick on front. With heavy tear resistant clear vinyl, these holders are made to last.
Size: 2 11/16 X 4 1/16''

Minimum order quantity: 50

Same heavy vinyl as our Clip-On ID Holders. And two-pocket versions are now available with an extra pocket on the back. Vinyl is .030” thick on back and .012” thick on front. With heavy tear resistant clear vinyl, these holders are made to last.
Size: 3 13/16 X 3 1/16

Minimum order quantity: 50

Comes with an adjustable side guide to make sure the slot is centered on your card.

• Punches cards up to .032” maximum card thickness.
• Distance from edge of card to top of slot is 3/16”.
• Punches a standard 9/16" wide x 1/8" high slot.

Table Top, Light/Medium Duty is a popular choice that punches through cards up to .060" thick.

• .060” maximum card thickness
• Distance from edge of card to top of slot: 1/8" - 9/16"
• Punches a standard 9/16" wide x 1/8" high slot.

Side guide adjusts to center the slot, and the slot’s depth from the card’s edge is also adjustable.

• .070” maximum card thickness
• Distance from edge of card to top of slot: 1/8” min. to 1/4” max.
• Punches a standard 9/16" wide x 1/8" high slot.